Skip to content
Breathalyzer

Fuel cell breathalyzers

AlcoMate Revo review of a fuel cell tester with a swappable sensor

The AlcoMate Revo (model TS200) from AK Solutions takes an unusual approach to calibration: instead of mailing the tester away, you replace its precalibrated sensor module yourself. Our review relies on the specifications and product information the maker publishes on its own store, including the separate page for the replacement module. Below you will find the stated figures, what is missing from the published material, and how the module system changes the cost and convenience of ownership.

Check price on Amazon

We earn a commission if you buy through our links, at no extra cost to you.

Quick verdict on the AlcoMate Revo

The Revo is a strong fit for anyone who tests often and does not want downtime, because a fresh sensor module restores factory calibration in minutes. It carries a published tolerance and a fuel cell sensor, and the maker aims it at both professional and demanding personal users. The cost of that convenience is a recurring module purchase at least once a year, so budget for it from day one.

AlcoMate Revo specifications

SpecWhat the maker states
Sensor Advanced fuel cell alcohol sensor in a PRISM replaceable module (Pre-Calibrated Replaceable Intelligent Sensor Module)
Stated accuracy Plus or minus 0.005 at 0.10% BAC
Detection range 0.000 to 0.400% BAC
Display 4-digit LCD
Warm up time Not published by the maker
Result time Not published by the maker
Power 2 AAA batteries included, battery life not published by the maker
Size and weight 4.0 x 2.0 x 0.6 in, weight listed by the maker as 1.0 oz
Connectivity None stated
Other features Active pressure sensor, deep lung air sampling, cumulative test counter
Warranty 1 year

Spec source: maker's published specifications

Who the AlcoMate Revo suits

AlcoMate lists corporate, law enforcement, medical and military buyers alongside high-end consumers, and says the Revo is the single source selection of the US Navy and Marine Corps. In practice it suits a small employer or safety manager who screens staff and cannot afford to send the only tester away for weeks, a household that wants a fuel cell device with a clear upkeep path, and a frequent tester who will burn through a sensor's life within the year anyway. The cumulative test counter helps all of them see how close the module is to its limit. The kit also comes with a hard case, a soft pouch and 5 disposable mouthpieces, so it is ready for shared use out of the box.

What to know before buying the Revo

  • Warm up time, result time and battery life are not on the maker's product page, so check the manual if those matter to you.
  • AlcoMate states DOT Approved and US Coast Guard Approved. FDA clearance is not published by the maker, and we did not find the Revo by name in the NHTSA notices available to us, so read the DOT claim as the maker's own statement.
  • Sensor modules come in two types that are not interchangeable: Type A for units bought in or before September 2020 and Type B for units bought after October 2020. Check the serial number and the calibration point of your current module before ordering.
  • Hygiene matters with shared use; AlcoMate sells single-use mouthpieces with one-way flow, covered on our breathalyzer mouthpieces page.

Calibration and upkeep with PRISM modules

AlcoMate lists the Revo's calibration as PRISM technology with no factory calibration. Maintenance is to replace the sensor every 1,000 tests or at least once a year, and the module page phrases it as up to 1,000 tests or one continuous year of testing, whichever comes first. No send in recalibration is offered for this model. The swap keeps the tester in service, but it also means the module is a running cost you cannot skip: a Revo with an expired module is no longer within its calibration. For context on other approaches, read our guide on calibrating a breathalyzer.

How the Revo compares

Fuel cell, replaceable module

Most personal fuel cell testers rely on a send in service, which costs less per visit in some product lines but leaves you without a device for days. The Revo flips that trade: more predictable upkeep, no waiting, and a recurring module cost. Against semiconductor testers, the fuel cell sensor brings better selectivity for alcohol, as explained on the fuel cell vs semiconductor breathalyzer page. For workplace buyers, the professional breathalyzer category puts the Revo next to other screening devices, and the best breathalyzer ranking compares it with consumer picks.

We earn a commission if you buy through our links, at no extra cost to you.

Check price on Amazon

AlcoMate Revo questions

Does the AlcoMate Revo need to be sent in for calibration?

No, you replace the precalibrated PRISM sensor module yourself, and AlcoMate offers no send in service for the Revo.

How often should the Revo sensor module be replaced?

AlcoMate says every 1,000 tests or at least once a year, whichever comes first.

What accuracy does AlcoMate state for the Revo?

The maker states plus or minus 0.005 at 0.10% BAC.

Do all Revo sensor modules fit every unit?

No, Type A modules fit units bought in or before September 2020 and Type B modules fit units bought after October 2020.

What batteries does the AlcoMate Revo use?

It runs on 2 AAA batteries, which are included, and the maker does not publish battery life.

AlcoMate RevoFuel cell, replaceable module
Check price on Amazon